On this page, you will find the March 2021 security patch for the Samsung Galaxy Fold (SM-F907B).The update is based on Android 11 and brings nothing new except the security patch.This firmware has the version number PDA F907BXXU4EUBF with the operating system Android 11 which is supported only for the Samsung Galaxy Fold (SM-F907B).
In March 2021 security patch, Google has addressed multiple security vulnerabilities affecting the Android runtime, framework, system, and media framework. Samsung has also patched the vulnerabilities that were found in Android OS as well as Samsung’s own software.
Samsung started rolling the March 2021 security patch to Galaxy Fold via OTA (over the air) for users. If you have not received it yet, you can flash the build number F907BXXU4EUBF manually using the ODIN flash tool. Check whether you already received the OTA update on your device by following the below steps.
Check Software Update Manually:
To check software update manually, go to Settings ->Software Update -> Download and Install
If you have any updates, you can download and install them on your Galaxy Fold .
If you have not received any update, you can now download and install the March 2021 security patch on Galaxy Fold manually by following this step given below.
Instruction to Install:
- Download ODIN Flash tool
- Download Firmware File: Use Samloader Tool | Frija Tool | Samfirm Tool
- Download Samsung USB Driver
Step 1: Download the ODIN flash tool and extract it on your PC in a new folder called ODIN
Step 2: Download and extract the firmware file (F907BXXU4EUBF) in the same folder where you extracted the ODIN tool
Step 3: You should get 5 files to flash it on your Galaxy Fold such as
AP (System &Recovery) BL (Bootloader) CP (Modem / Radio) CSC_*** (Country / Region / Operator) HOME_CSC_*** (Country / Region / Operator)
Step 4: Open the ODIN flash tool and add each file into the respective field.
Note: Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
Step 5: Turn off your device. To boot into download or Odin mode, try this different combination:
For a device with the Bixby button: POWER Plus VOLUME DOWN Plus BIXBY For all other Samsung device, you can try any method given below: Option 1 VOLUME DOWN Plus VOLUME UP then USB cable Option 2 POWER Plus VOLUME DOWN Plus VOLUME UP Option 3 POWER Plus VOLUME DOWN Plus HOME BUTTON Option 4 (For Galaxy Note 11 ) USB cable Plus VOLUME DOWN Plus BIXBY Option 5 (For Galaxy Note 11 Series) POWER Plus VOLUME UP
Step 6: Once your device enters download mode, you can connect your device using the USB cable. Odin will detect your device and will show up blue box with the COM port number. If not, make sure you have to download the latest Samsung USB drivers and used the original USB cable to connect.
Note: Don’t select any other extra option except F.Reset Time and Auto-Reboot.
Step 7: Tap on the Start button to begin the installation process. It will show PASS in a green box and your device will reboot with the new security patch: March 2021 and build number F907BXXU4EUBF.
Step 8: You can disconnect the USB cable from your phone and PC.
That’s it. I hope this guide was useful to flash the build number F907BXXU4EUBF on your Galaxy Fold ( SM-F907B )