- Version Android 6.0
- Download
- File Size 962 MB
- File Count 1
- Create Date May 27, 2021
- Last Updated May 27, 2021
| File | Action |
|---|---|
| Wiko_Sunny_2_Swisscom_V5_22092017_SPD.zip | Download |
On this page, we will share the official firmware file (also known as Stock ROM) for the Wiko Sunny 2 Swisscom. You can use this firmware to upgrade or downgrade your device by following this guide.
To flash the firmware file on Wiko Sunny 2 Swisscom, you can simply download the link given below and follow the instruction to flash.
Advantages of Stock ROM:
Here are the answers to why you need to download and save the Wiko Sunny 2 Swisscom Stock ROM firmware file on your computer.
- Unbrick your dead phone.
- You can use this firmware to repair the IMEI on your device
- By flashing the firmware on Wiko Sunny 2 Swisscom, you can remove malware or Adwares
- Fix boot loop issue
- Fix Network related issue
- Fix WiFi or Bluetooth issue
- unroot Wiko Sunny 2 Swisscom
- To Reset or Remove FRP on your Wiko Sunny 2 Swisscom
- Restore back to Factory State
- Bypass Pattern lock on your Wiko Sunny 2 Swisscom
Wiko Sunny 2 Swisscom Firmware (Stock ROM) Detail
File Name: Wiko_Sunny_2_Swisscom_V5_22092017_SPD.zip
File Size: 962 MB
Flash Tool: Spreadtrum Flash tool
How to Flash Firmware File on Wiko Sunny 2 Swisscom:
- Make sure to download and install the drivers on your PC.
- Now download the package and extract it on your computer.
- Open the Spreadtrum Flash tool and - click Load Package.
- In the ROM extracted folder, Select the Pac file.
- Turn off your Mobile
- Click Download and Connect your device to PC.
- The flashing process will begin
- Once your flashing is done, your device will reboot.
Enjoy the Wiko Sunny 2 Swisscom flash file.