Wiko Ridge Fab 4G Firmware Flash File (Stock ROM)

  • Version Android 5.1 Lollipop
  • Download 2
  • File Size 1 GB
  • File Count 2
  • Create Date May 29, 2021
  • Last Updated May 29, 2021
FileAction
Wiko_Ridge_Fab_4G_Lollipop_V14.zipDownload
Wiko_Ridge_Fab_4G_V13.zipDownload

On this page, we will share the official firmware file (also known as Stock ROM) for the Wiko Ridge Fab 4G. You can use this firmware to upgrade or downgrade your device by following this guide.

To flash the firmware file on Wiko Ridge Fab 4G, you can simply download the link given below and follow the instruction to flash.

Advantages of Stock ROM:

Here are the answers to why you need to download and save the Wiko Ridge Fab 4G Stock ROM firmware file on your computer.

  • Unbrick your dead phone.
  • You can use this firmware to repair the IMEI on your device
  • By flashing the firmware on Wiko Ridge Fab 4G, you can remove malware or Adwares
  • Fix boot loop issue
  • Fix Network related issue
  • Fix WiFi or Bluetooth issue
  • unroot Wiko Ridge Fab 4G
  • To Reset or Remove FRP on your Wiko Ridge Fab 4G
  • Restore back to Factory State
  • Bypass Pattern lock on your Wiko Ridge Fab 4G

Wiko Ridge Fab 4G Firmware (Stock ROM) Detail

Flash File Name: Wiko_Ridge_Fab_4G_V13.zip
File Size: 624 MB
Flash Tool: SP Flash tool

Flash File Name: Wiko_Ridge_Fab_4G_Lollipop_V14.zip
File Size: 1 GB
Flash Tool: SP Flash tool

How to Flash Firmware File on Wiko Ridge Fab 4G:

  1. Make sure to download and install the drivers on your device.
  2. Now download the package and extract it on your computer.
  3. Open the SP Flash tool and - Click on the Scatter-Loading option on the right side of the tool.
  4. By loading the Android_scatter.txt, you will also load the firmware file.
  5. Tap on the Start button to start the flashing process.
  6. Turn off your Mobile and Connect it to the PC by pressing the Volume down or Volume up key.
  7. Once your flashing is done, your device will reboot.

Enjoy the Wiko Ridge Fab 4G flash file.