Multilaser MS40S Firmware Flash File (Stock ROM)

  • Version Android 7.0
  • Download
  • File Size 1 GB
  • File Count 1
  • Create Date July 10, 2021
  • Last Updated July 10, 2021
FileAction
Multilaser_MS40S_SC7731_20180621_7.0_SPD.zipDownload

On this page, we will share the official firmware file (also known as Stock ROM) for the Multilaser MS40S. You can use this firmware to upgrade or downgrade your device by following this guide.

To flash the firmware file on Multilaser MS40S, you can simply download the link given below and follow the instruction to flash.

Advantages of Stock ROM:

Here are the answers to why you need to download and save the Multilaser MS40S Stock ROM firmware file on your computer.

  • Unbrick your dead phone.
  • You can use this firmware to repair the IMEI on your device
  • By flashing the firmware on Multilaser MS40S, you can remove malware or Adwares
  • Fix boot loop issue
  • Fix Network related issue
  • Fix WiFi or Bluetooth issue
  • unroot Multilaser MS40S
  • To Reset or Remove FRP on your Multilaser MS40S
  • Restore back to Factory State
  • Bypass Pattern lock on your Multilaser MS40S

Multilaser MS40S Firmware (Stock ROM) Detail

File Name: Multilaser_MS40S_SC7731_20180621_7.0_SPD.zip
File Size: 1 GB
Flash Tool: Spreadtrum Flash tool

How to Flash Firmware File on Multilaser MS40S:

  1. Make sure to download and install the drivers on your PC.
  2. Now download the package and extract it on your computer.
  3. Open the Spreadtrum Flash tool and - click Load Package.
  4. In the ROM extracted folder, Select the Pac file.
  5. Turn off your Mobile
  6. Click Download and Connect your device to PC.
  7. The flashing process will begin
  8. Once your flashing is done, your device will reboot.

Enjoy the Multilaser MS40S flash file.