- Version Android 7.0
- Download
- File Size 1 GB
- File Count 1
- Create Date May 31, 2021
- Last Updated May 31, 2021
| File | Action |
|---|---|
| Micromax_Q442_SW_V1.0_HW_V4.04_31102017_7.0_SPD.zip | Download |
On this page, we will share the official firmware file (also known as Stock ROM) for the Micromax Q442. You can use this firmware to upgrade or downgrade your device by following this guide.
To flash the firmware file on Micromax Q442, you can simply download the link given below and follow the instruction to flash.
Advantages of Stock ROM:
Here are the answers to why you need to download and save the Micromax Q442 Stock ROM firmware file on your computer.
- Unbrick your dead phone.
- You can use this firmware to repair the IMEI on your device
- By flashing the firmware on Micromax Q442, you can remove malware or Adwares
- Fix boot loop issue
- Fix Network related issue
- Fix WiFi or Bluetooth issue
- unroot Micromax Q442
- To Reset or Remove FRP on your Micromax Q442
- Restore back to Factory State
- Bypass Pattern lock on your Micromax Q442
Micromax Q442 Firmware (Stock ROM) Detail
File Name: Micromax_Q442_SW_V1.0_HW_V4.04_31102017_7.0_SPD.zip
File Size: 1 GB
Flash Tool: Spreadtrum Flash tool
How to Flash Firmware File on Micromax Q442:
- Make sure to download and install the drivers on your PC.
- Now download the package and extract it on your computer.
- Open the Spreadtrum Flash tool and - click Load Package.
- In the ROM extracted folder, Select the Pac file.
- Turn off your Mobile
- Click Download and Connect your device to PC.
- The flashing process will begin
- Once your flashing is done, your device will reboot.
Enjoy the Micromax Q442 flash file.