- Version Android 9.0 Pie
- Download
- File Size 2 GB
- File Count 1
- Create Date September 9, 2021
- Last Updated September 9, 2021
File | Action |
---|---|
S3-C2-D-Z-2-C29LI03B06_20201117.zip | Download |
On this page, we will share the official firmware file (also known as Stock ROM) for the G-Tab S3. You can use this firmware to upgrade or downgrade your device by following this guide.
To flash the firmware file on G-Tab S3, you can simply download the link given below and follow the instruction to flash.
Advantages of Stock ROM:
Here are the answers to why you need to download and save the G-Tab S3 Stock ROM firmware file on your computer.
- Unbrick your dead phone.
- You can use this firmware to repair the IMEI on your device
- By flashing the firmware on G-Tab S3, you can remove malware or Adwares
- Fix boot loop issue
- Fix Network related issue
- Fix WiFi or Leagooetooth issue
- unroot G-Tab S3
- To Reset or Remove FRP on your G-Tab S3
- Restore back to Factory State
- Bypass Pattern lock on your G-Tab S3
G-Tab S3 Firmware (Stock ROM) Detail
File Name: S3-C2-D-Z-2-C29LI03B06_20201117.zip
File Size: 1.1 GB
Flash Tool: Spreadtrum Flash tool
How to Flash Firmware File on G-Tab S3:
- Make sure to download and install the drivers on your PC.
- Now download the package and extract it on your computer.
- Open the Spreadtrum Flash tool and - click Load Package.
- In the ROM extracted folder, Select the Pac file.
- Turn off your Mobile
- Click Download and Connect your device to PC.
- The flashing process will begin
- Once your flashing is done, your device will reboot.
Enjoy the G-Tab S3 flash file.