Evercoss Genpro X S50D Firmware Flash File (Stock ROM)

  • Version Android 6.0
  • Download
  • File Size 995 MB
  • File Count 2
  • Create Date May 25, 2021
  • Last Updated May 31, 2021
FileAction
Evercoss_Genpro_X_S50D_V10_31032017.zipDownload
Evercoss_Genpro_X_S50D_V09_13032017.zipDownload

On this page, we will share the official firmware file (also known as Stock ROM) for the Evercoss Genpro X S50D. You can use this firmware to upgrade or downgrade your device by following this guide.

To flash the firmware file on Evercoss Genpro X S50D, you can simply download the link given below and follow the instruction to flash.

Advantages of Stock ROM:

Here are the answers to why you need to download and save the Evercoss Genpro X S50D Stock ROM firmware file on your computer.

  • Unbrick your dead phone.
  • You can use this firmware to repair the IMEI on your device
  • By flashing the firmware on Evercoss Genpro X S50D, you can remove malware or Adwares
  • Fix boot loop issue
  • Fix Network related issue
  • Fix WiFi or bluetooth issue
  • unroot Evercoss Genpro X S50D
  • To Reset or Remove FRP on your Evercoss Genpro X S50D
  • Restore back to Factory State
  • Bypass Pattern lock on your Evercoss Genpro X S50D

Evercoss Genpro X S50D Firmware (Stock ROM) Detail

File Name: Evercoss_Genpro_X_S50D_V09_13032017.zip
File Size: 995 MB
Flash Tool: Spreadtrum Flash tool

File Name: Evercoss_Genpro_X_S50D_V10_31032017.zip
File Size: 995 MB
Flash Tool: Spreadtrum Flash tool

How to Flash Firmware File on Evercoss Genpro X S50D:

  1. Make sure to download and install the drivers on your PC.
  2. Now download the package and extract it on your computer.
  3. Open the Spreadtrum Flash tool and - click Load Package.
  4. In the ROM extracted folder, Select the Pac file.
  5. Turn off your Mobile
  6. Click Download and Connect your device to PC.
  7. The flashing process will begin
  8. Once your flashing is done, your device will reboot.

Enjoy the Evercoss Genpro X S50D flash file.