- Version Android 4.2.1
- Download 5
- File Size 491 MB
- File Count 1
- Create Date May 1, 2021
- Last Updated May 1, 2021
On this page, we will share the official firmware file (also known as Stock ROM) for the Allview V1 Viper. You can use this firmware to upgrade or downgrade your device by following this guide.
To flash the firmware file on Allview V1 Viper, you can simply download the link given below and follow the instruction to flash.
Advantages of Stock ROM:
Here are the answers to why you need to download and save the Allview V1 Viper Stock ROM firmware file on your computer.
- Unbrick your dead phone.
- You can use this firmware to repair the IMEI on your device
- By flashing the firmware on Allview V1 Viper, you can remove malware or Adwares
- Fix boot loop issue
- Fix Network related issue
- Fix WiFi or Bluetooth issue
- unroot Allview V1 Viper
- To Reset or Remove FRP on your Allview V1 Viper
- Restore back to Factory State
- Bypass Pattern lock on your Allview V1 Viper
Allview V1 Viper Firmware (Stock ROM) Detail
Flash File Name: Allview_V1_Viper_MT6589_16GB_05142014_4.2.1.zip
File Size: 491 MB
Flash Tool: SP Flash tool
How to Flash Firmware File on Allview V1 Viper:
- Make sure to download and install the drivers on your device.
- Now download the package and extract it on your computer.
- Open the SP Flash tool and - Click on the Scatter-Loading option on the right side of the tool.
- By loading the Android_scatter.txt, you will also load the firmware file.
- Tap on the Start button to start the flashing process.
- Turn off your Mobile and Connect it to the PC by pressing the Volume down or Volume up key.
- Once your flashing is done, your device will reboot.
Enjoy the Allview V1 Viper flash file.